What is the reason for the printing jam of the sublimation printer?
The sublimation printer has not been used for a long time, and the printer will be stuck when printing. What is the cause? Questions about the quality of Fedar sublimation printers?
Dye-sublimation printer technicians pointed out that high-quality dye-sublimation printers have very stable performance and good printing results. If the dye sublimation printer gets stuck, it will not only affect the printing speed of the dye sublimation printer, but also greatly affect the printing effect. Once the dye sublimation printer is found to be stuck, it should be solved in time.
The reasons for the printing freeze of the dye sublimation printer can be understood from the following aspects:
1. Fedar sublimation printer related accessories may be faulty. For example, motor overload or motor aging after prolonged operation. At this time, you need to try a new motor. It may also be a heat dissipation problem on the main board of the dye-sublimation printer. You can equip the printer with a cooling fan to dissipate heat.
2. The configuration of the computer connected to the Fedar sublimation printer is relatively low, the computer memory is insufficient, or the computer is infected with a virus, etc., it is easy to cause the dye sublimation printer to freeze during printing. In addition, the incompatibility of the computer with the dye-sublimation printer will also cause the stuttering phenomenon. Therefore, when configuring a computer for a thermal sublimation printer, you should try to choose a model with high configuration and high performance.
3. The data cable connected to the sublimation printer is too long or of poor quality, which will cause the printer to freeze during printing.
In short, there are many reasons why the dye-sublimation printer is stuck in printing. As long as you check them one by one, the problem will be solved.