The printer suddenly doesn't work, what's the problem?
I believe everyone has heard about the clogging problem of the printer. As the name suggests, it is actually a clogging problem in the print head of the inkjet printer. So if such a problem occurs, it refers to inkjet printing products, and the printer plugging is the reason why the printer suddenly does not work.
If the inkjet printer is not used for a long time, the nozzle will be blocked, which will make the printer not work normally.
What is the main reason that causes the inkjet printer to block the head?
It may be that the printer nozzle is not tightly sealed after returning to its normal position, or it may be caused by the excessive evaporation of the print head's water due to long time placement, which eventually causes the ink to dry up at the print nozzle, so that the ink naturally cannot be sprayed normally. Out.
Nowadays, many manufacturers recommend the use of original ink. If it is mixed with other inks, it is likely to cause a chemical reaction between the ink and the ink, which will eventually cause the printer to fail to work normally.
So on the whole, if the printer is not used for a long time, nozzle clogging will occur. The reason is due to excessive evaporation of water.
How can such problems be avoided?
When the printer is not used for a long time, the phenomenon of plugging will occur. Therefore, if you do not use it for a period of time, you should also turn it on regularly. It is recommended that you use it once a week or so.
When we encounter a power failure or sudden power failure, we must wait for the power supply to stabilize before turning on the printer to ensure that the printer nozzle is not exposed to the air for a long time.
When the ink is used up, the ink should be filled or the ink cartridge should be replaced in time. It is important to know that if the replacement is not timely, it will also cause the print head to be clogged.
In daily use, we can also clean the print head of the printer regularly.
How to solve the plugging problem?
The print head can be cleaned through the printer's maintenance interface. Generally speaking, it can be divided into light cleaning and deep cleaning. If the disconnection situation improves, you can perform the cleaning operation again until the disconnection no longer occurs. Under normal circumstances, if the blockage is only caused by natural factors, it can be easily solved by this method.